A 6.5" by 15.5” wide 4 row sheeting head designed for forming masa into shapes such as triangles and rounds. This sheeter will be attached to the inlet of the oven and consisting of the following:
Side plates constructed of 1/2" aluminum plate, machined as required and polished.
Rollers constructed of extra-heavy wall stainless steel pipe with stainless steel forged end pieces. Front roller is grooved for 6 rows of product and shot peened. Rear roller is smooth with no plastic end pieces. Both rollers are turned straight, no contour.
Roller advance mechanism consisting of a dual threaded adjusters and cam actuated release mechanisms. The operator has complete control of the product weight across the entire width of the sheeter.
The sheeter is driven by the same oven drive. The rear roller is geared to follow at a pre-set ratio through out the entire speed range. By operating the rollers at a speed differential the stripping wire on the rear roller is eliminated.
Takeout conveyor consisting of a carbon steel wire mesh belt driven with a magnetic drive system. The conveyor sideboards are constructed of aluminum plate, machined as required and anodized coated.
One Cutter is supplied with each machine with the customers’ choice of brass or plastic.